Hitachi table saw

Rousseau 2700XL Saw Stand For Makita 2703, Hitachi C10RA, DeWalt DW744 Table Saws Review

Rousseau 2700XL Saw Stand For Makita 2703, Hitachi C10RA, DeWalt DW744 Table Saws Feature

• Benchtop table saw stand for saws with tops up to 24-1/2-inches deep and 27-inches wide
• Includes presets for Makita, Hitachi, DEWALT, and Delta models; folds for easy storage
• Tubular steel fence and high-pressure laminate top; rotating nylon cams; assembly required
• 1 saw stand; saw not included; optional extensions available
• 34-1/2-inches high; 52-pounds; limited lifetime warranty

Rousseau 2700XL Saw Stand For Makita 2703, Hitachi C10RA, DeWalt DW744 Table Saws Overview

This basic stand extends rip capacity to 27 inches while increasing fence accuracy of benchtop table saws. The folding legs bring the saw up to a comfortable working height of 34-1/2 inches. The high-pressure laminate top increases the work surface of the saw by nearly 90%. Setup and breakdown of the unit are extremely quick. Once the saw, fence, and hairline indicator have been calibrated, the line-up system returns the saw to its original setting, ready for use. For use with Makita model no. 2703, Hitachi model no. C10RA, and DeWalt model no. DW744.

Rousseau 2700XL Saw Stand For Makita 2703, Hitachi C10RA, DeWalt DW744 Table Saws Specifications

Benchtop table saws have come a long way in the past few years, evolving into precision machinery for even the finest joinery. Here’s a stand that’s worthy of those little dynamos. It’s preset for several models of Makita, Hitachi, DeWalt, and Delta, but it’s easily adapted for saws with tops up to 24-1/2 inches deep and 27 inches wide. This is by far the sturdiest benchtop accessory we’ve seen, with the best array of options. At a great working height of 34-1/2 inches, you’ll increase your rip capacity to a burly 27 inches and won’t have to call your next-door neighbor anymore to give you a hand when you’re cutting sheet goods. The fence is tubular steel with an adjustable magnified hairline indicator for superior readability. Something we noticed and really liked on this stand was that the front edge sits just a bit lower than the saw table, so stock slides smooth as silk without catching. The optional add-ons are great, too: the PM2715XL extension adds a router table to your saw and increases rip capacity to an awesome 49 inches. An outfeed table is available, too. And should you need to, the saw removes easily and the stand folds flat for storage and portability. A winner all the way around. –Kris Jensen-Van Heste

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 19, 2011 07:48:58

Thanks To : Kingbookmark MyCoolbookmark

Hitachi C10RA3 10″ Jobsite Table Saw with Stand Review

Hitachi C10RA3 10″ Jobsite Table Saw with Stand Feature

• Direct drive universal 15 Amp motor produces 5,000 RPM
• Oversized aluminum table top for extra support
• Telescoping table extension supports 24-1/2″ ripping capacity to right, 10″ to left
• Self aligning metal rip fence with quick-lock slides
• Dust port measures 2-1/2″, connects to a shop vac or dust collection system

Hitachi C10RA3 10″ Jobsite Table Saw with Stand Overview

The C10RA3 10″ Jobsite Table Saw is engineered for rip-sawing and cross-cutting of ordinary wood, hardwood, plywood, composite wood materials and plastics. The C10RA3 comes equipped with a stand and is an ideal choice for any workshop or jobsite. Features: Direct drive universal 15 Amp motor produces 5,000 RPM to power through the toughest ripping applications. Oversized aluminum table top for extra support. Telescoping table extension supports 24-1/2″ of ripping capacity to the right and 10″ to the left. Self aligning metal rip fence with quick-lock slides easily along the table for reliable, consistent and easy set up. Cut line indicator allows the user to pre-align cuts with ease. Front mounted knob allows the user to quickly adjust the blade height and side mounted knob adjusts the blade tilt. Sturdy metal stand is included to support the base and can be removed and folded away for easy portability. Stand offers an adjustable foot on the front right leg that helps to stabilize the saw on uneven ground. Integrated storage on the base keeps the standard accessories securely on board during transport. Dust port located at the rear of the base measures 2-1/2″ and connects to a shop vac or dust collection system for a cleaner work environment. Includes: 10″ 36-Tooth Carbide Tipped Blade, Miter Gauge, Rip Fence, Dado Insert, Wrench, Folding Metal Stand. Specifications: Blade Size – 10″. Full Load Current – 15 Amps. No-Load Speed – 5000 RPM. Blade Type Included – 36T Carbide Tipped. Table Material – Aluminum. Table Size – 30-3/4″ x 19-1/2″. Rip Capacity Right – 24-1/2″. Max Cut Depth @ 90 – 3″, @ 45 – 2-1/2″. Max Width of Dado – 1/2″. Tool Weight – 58.3 lbs.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 19, 2011 07:04:51

Recommend : Kingbookmark MyCoolbookmark

Ridgid R4510 Heavy-Duty Portable Table Saw with Stand Review

Ridgid R4510 Heavy-Duty Portable Table Saw with Stand Feature

• Features on-board storage for easy reach
• Tool-free blade guard
• 15 amp motor heavy-duty power with soft start
• Single-handle height/bevel adjustment
• Micro-adjust fence for fine adjustments

Ridgid R4510 Heavy-Duty Portable Table Saw with Stand Overview

Includes 10-in Portable Table Saw with Stand – ZRR4510, Carbide Tipped Blade, Anti-Kickback Pawls, Blade Guard Assembly, Rip Fence, Miter Gauge, Push Stick, Blade Wrenches, Operator’s Manual

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 19, 2011 04:10:10

Recommend : Kingbookmark

Bosch 4100 10-Inch Worksite Table Saw Review

Bosch 4100 10-Inch Worksite Table Saw Feature

• Squarelock Rip Fence is engineered for maximum trueness. Additional precision improvements-include single point bevel movement and improved miter system with t-slots
• Durable sub-base-increases tool life by handling job-site abuse
• Integrated carry handles-increases portability
• Single point bevel movement for consistent accuracy
• 1-Year warranty

Bosch 4100 10-Inch Worksite Table Saw Overview

The Bosch 4100 Table saw offers radical new features and enhancements that make the 4100-series the most precise, durable and high-performing table saw in the category. The 4100 features the industry’s first-ever Modular Smart Guard System. Innovations include a super-durable sub-base with carry handles, Bosch-exclusive SquareLock Rip Fence with auxiliary fence slots and a t-slot miter gauge. With all these features, the new 4100-Series 10-inch Portable Table Saw will keep Bosch at the top of the category.The Bosch Modular Smart Guard System is a ground-breaking new design for portable table saws that includes a blade guard, riving knife and anti-kickback pawls. All three elements are modular and tool free, so users can quickly and easily remove or add each component independently based on the task. The blade guard is particularly user-friendly with a new split-guarding innovation that offers optimal line of sight and maximum protection. The riving knife prevents material from pinching the blade and offers positions for: full upright, -Inchsplitting-Inch and -Inchnon-thru-Inch cutting. This system is the easiest and most convenient table saw guarding solution on the market.For professional tools, durability is an essential component of jobsite value. The 4100 is jobsite proven with a super-durable sub-base complete with integrated carrying handles for quick and easy transport. Other improvements include a single-point bevel movement for consistent accuracy, t-slot miter system and enhanced dust collection.The 4100 also offers Constant Response Circuitry with Soft Start for smooth ramp up speed and to maintain speed under load. At 29 by 21-1/2-inches square, the table saw provides the most usable tabletop space available with a 25-inch rip capacity that can easily handle sheet goods or larger stock. The arbor lock system makes blade changes quick and easy. On-board storage for accessories and the Smart Guard System makes it easier to move between jobs.

Bosch 4100 10-Inch Worksite Table Saw Specifications

The Bosch 4100 Table saw offers radical new features and enhancements that make the 4100-series the most precise, durable and high-performing table saw in the category. The 4100 features the industry’s first-ever Modular Smart Guard System. Innovations include a super-durable sub-base with carry handles, Bosch-exclusive SquareLock Rip Fence with auxiliary fence slots and a t-slot miter gauge. With all these features, the new 4100-Series 10-inch Portable Table Saw will keep Bosch at the top of the category.

The Bosch Modular Smart Guard System is a ground-breaking new design for portable table saws that includes a blade guard, riving knife and anti-kickback pawls. All three elements are modular and tool free, so users can quickly and easily remove or add each component independently based on the task. The blade guard is particularly user-friendly with a new split-guarding innovation that offers optimal line of sight and maximum protection. The riving knife prevents material from pinching the blade and offers positions for: full upright, “splitting” and “non-thru” cutting. This system is the easiest and most convenient table saw guarding solution on the market.

For professional tools, durability is an essential component of jobsite value. The 4100 is jobsite proven with a super-durable sub-base complete with integrated carrying handles for quick and easy transport. Other improvements include a single-point bevel movement for consistent accuracy, t-slot miter system and enhanced dust collection.

The 4100 also offers Constant Response Circuitry with Soft Start for smooth ramp up speed and to maintain speed under load. At 29 by 21-1/2-inches square, the table saw provides the most usable tabletop space available with a 25-inch rip capacity that can easily handle sheet goods or larger stock. The arbor lock system makes blade changes quick and easy. On-board storage for accessories and the Smart Guard System makes it easier to move between jobs.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 19, 2011 04:02:10

Visit : MyCoolbookmark Kingbookmark

Skil 3400-15 15 Amp 10-Inch Table Saw with Stand and Dust Collection Review

Skil 3400-15 15 Amp 10-Inch Table Saw with Stand and Dust Collection Feature

• Powerful 15-Amp motor
• T-slot channel secures miter gauge for wide cross-cuts
• Die cast miter gauge for accurate angle and cross cutting
• Rip fence magnifying lens for accurate measurements
• Integrated carrying handles for easy transport and on-tool storage keeps blades and wrenches handy

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 18, 2011 07:04:02

Related : MyCoolbookmark

Bosch TS1003 Table Saw Left Side Support Extension Review

Bosch TS1003 Table Saw Left Side Support Extension Feature

• Table saw left-side support extension for Bosch 4000 10-inch worksite table saw
• Extends table additional 12-inches for working with wide and long-pieces; stores flush when not in use
• Aluminum construction; 5mm hex wrench and needle nose pliers needed for installation
• Includes 1 table extension; table saw not included
• 4.4-pounds; 1-year warranty

Bosch TS1003 Table Saw Left Side Support Extension Overview

This Bosch TS1003 Left Side Support Extension increase the width of your table to 52-inches when used with the Bosch 4000 10-inch Worksite Table Saw.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 17, 2011 15:48:37

My Links : Kingbookmark

Steel City Tool Works 35990C 10-Inch Contractor Table Saw with Cast Iron Table Top Review

Steel City Tool Works 35990C 10-Inch Contractor Table Saw with Cast Iron Table Top Feature

• Motor: 1-1/2 HP TEFC, 120V/240V, 13/6.5 Amps
• Blade RPM: 3,450 RPM
• Seamless Cast Iron table top provides the best environment during operation.
• The precision-machined cast iron trunions are mounted to the top cabinet to ensure perfect blade alignment, increased stability and ease of adjustment
• Warranty: 5 Years

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 17, 2011 15:18:02

See Also : MyCoolbookmark Kingbookmark

Bosch TS1002 Table Saw Rear Outfeed Support Extension Review

Bosch TS1002 Table Saw Rear Outfeed Support Extension Feature

• Table saw rear outfeed support extension
• Extends 18-inches and stores flush to table; extends working depth of Bosch 4000 10-inch table saw
• Hardened metal construction; aluminum mounts
• Includes 1 table saw extension; table saw not included
• 1-year warranty

Bosch TS1002 Table Saw Rear Outfeed Support Extension Overview

Table saw rear outfeed support extension. Extends 18-inches and stores flush to table; extends working depth of Bosch 4000 10-inch table saw. Hardened metal construction; aluminum mounts. Includes 1 table saw extension; table saw not included. 1-year warranty

Bosch TS1002 Table Saw Rear Outfeed Support Extension Specifications

Bosch TS1002 extends 18-inches and stores flush to table. It extends the working depth of Bosch 4000 10-inch table saw. It features hardened metal construction; aluminum mounts and includes 1 table saw extension. The table saw is not included. This product also has a 1-year warranty.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 17, 2011 15:08:42

See Also : Kingbookmark

DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity Review

DEWALT DW744X 10-Inch Job-Site Table Saw with 24-1/2-Inch Max Rip Capacity Overview

The DEWALT versatile 10-Inch Jobsite Table Saw pairs a portable design with a powerful 15 amp motor and a max rip capacity of 24-1/2 inches. Offering application-specific setups with the Site-Pro Modular Guarding System, this saw comes with a sturdy folding saw stand, a miter gauge, a push stick, and a dependable 10-inch, 24-tooth carbide blade.

10-Inch Jobsite Table Saw with Max-Rip Capacity At a Glance: Powerful 15 amp, high-torque motor delivers no-load speed of 3,650 rpm Site-Pro Modular Guarding System allows quick, tool-free adjustments Telescoping fence rails make transport easy and capacity big Dust-collection port for easy clean up Three-year limited warranty, one-year free service, and 90-day money-back guarantee

Featuring a dependable 15 amp motor that delivers a no-load speed of 3,650 rpm. View larger.

24-tooth carbide blade has max rip capacity of 24-1/2 inches. View larger.

Consistent, Powerful Performance
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw’s 10-inch blade spins at a no-load speed of 3,650 rpm for quick, clean cuts. Built-in electronic feedback helps the saw maintain consistent blade speeds, so cut quality remains consistently high–even when you’re tackling the toughest applications.

To ensure accuracy and user comfort, this saw features a heavy-duty internal motor mechanism that stabilizes the arbor and keeps vibration to a minimum. In addition, the saw’s soft-start feature allows for extended gear and motor life by reducing start-up torque.

Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.

The saw’s exclusive fence configuration enables a huge 24-1/2-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence’s telescoping design allows the rails to move out to 24 inches to rip full sheets of materials or be retracted for a compact design that’s easy to transport.

In addition to offering large rip capacity, this saw can cut dados up to 13/16-inch wide. It features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. And a big 26-1/2 by 19-1/4-inch table surface provides the support you need when working with large applications.

Compact, Portable Design
This DEWALT table saw weighs just 57 pounds which, along with the folding table saw stand, makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.

For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they’re not in use. A handy 2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.

This 10-inch jobsite table saw with 24 inch max rip capacity also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What’s in the Box
DW744X DEWALT 10-Inch Job Site Table Saw, 10-inch 24-tooth carbide blades, folding table saw stand (DW7440), miter gauge, and push stick.

Compact and portable at just 57 pounds, this table saw comes with a folding stand for convenience.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 17, 2011 15:07:30

See Also : MyCoolbookmark Kingbookmark

DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand Review

DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand Feature

• Site-Pro Modular Guarding System allows for tool free adjustments of the guarding components appropriate for each application
• Exclusive, telescoping fence delivers 24-1/2-inch rip capacity without sacrificing portability
• Rack and pinion fence rails make fence adjustments fast, smooth and accurate
• Features a 15.0 Amp high-torque motor with the power to cut pressure-treated lumber and hardwoods
• Telescoping fence rails retract to create a small, portable package; On Board Storage provides easy access to the Site-Pro Guarding components and push stick when not in use

DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand Overview

The DEWALT versatile 10-Inch Jobsite Table Saw with Rolling Stand pairs a portable design with a powerful 15 amp motor and a max rip capacity of 24-1/2 inches. Offering application-specific setups with the Site-Pro Modular Guarding System, this saw comes with a miter gauge, a push stick, and a 10-inch, 24-tooth carbide blades, and compact rolling stand for easy transport.

10-Inch Jobsite Table Saw with Rolling Stand At a Glance: Powerful 15 amp, high-torque motor delivers no-load speed of 3,650 rpm Quick, tool-free adjustments with Site-Pro Modular Guarding System Telescoping fence rails and rolling table saw stand for easy transport Dust-collection port for fast clean up Three-year limited warranty, one-year free service, and 90-day money-back guarantee

Saw is compact and portable at just 58 pounds and features a rolling stand for easy transportation. View larger.

24-tooth carbide blade has max rip capacity of 24-1/2 inches. View larger.

Consistent, Powerful Performance
Thanks to a 15 amp, high-torque motor, this DEWALT table saw delivers the power you need for tough jobs like cutting hardwood and pressure-treated lumber. The saw’s 10-inch blade spins at a no-load speed of 3,650 rpm for quick, clean cuts. Built-in electronic feedback helps the saw maintain consistent blade speeds, so cut quality remains consistently high–even when you’re tackling the toughest applications.

To ensure accuracy and user comfort, this saw features a heavy-duty internal motor mechanism that stabilizes the arbor and keeps vibration to a minimum. In addition, the saw’s soft-start feature allows for extended gear and motor life by reducing start-up torque.

Convenient Site-Pro Modular Guarding System
The DEWALT versatile Site-Pro Modular Guarding System makes it easy to set up for a variety of applications by allowing tool-free adjustment of application-specific guarding components.

The saw’s exclusive fence configuration enables a huge 24-1/2-inch rip capacity. Rack and pinion fence rails make fence adjustments fast, smooth, and accurate. The fence’s telescoping design allows the rails to move out to 24 inches to rip full sheets of materials or be retracted for a compact design that’s easy to transport.

In addition to offering large rip capacity, this saw can cut dados up to 13/16-inch wide. It features a maximum cut depth of 3-1/8 inches at 90 degrees and 2-1/4 inches at 45 degrees. And a big 26-1/2 by 19-1/4-inch table surface provides the support you need when working with large applications.

For added convenience, on-board storage provides easy access to the Site-Pro Guarding components and the push stick when they’re not in use. A handy 2-inch dust collection port allows you to connect the saw to a Shop-Vac for efficient dust extraction and a cleaner work area.

Portable Design and Unique Rolling Stand
This DEWALT table saw weighs just 58 pounds which, makes for easy setup and tear down. You can move it from your workshop to the worksite with ease.

This DEWALT features a rolling stand that makes transporting the saw around the worksite easy. This stand pairs heavy-duty aluminum construction with innovative details, like folding legs and convenient heavy-duty wheels. When upright, the stand puts your saw table top at an ideal 30-inches off the floor to keep your work at an ideal height and under control for accurate cuts. Plus, at just 33 pounds, this saw is built to roll right up stairs and over jobsite debris.

This 10-inch jobsite table saw with rolling stand also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What’s in the Box
DW744XRS DEWALT 10-Inch Job Site Table Saw, DW7440RS Rolling Table Saw Stand, 10-inch 24-tooth carbide blade miter gauge, and push stick.

This DEWALT table saw has a heavy-duty, 15 amp motor that delivers a no-load speed of 3,650 rpm.

Available at Amazon Check Price Now!

*** Product Information and Prices Stored: Apr 17, 2011 15:04:28

Tags : Kingbookmark MyCoolbookmark